Courses cisco systems. How CCNA Routing & Switching is trained
Perhaps the most popular of all Cisco certifications, the CCNA Routing and Switching certification validates an expert's basic networking knowledge. CCNA certified specialists can install, configure and manage local (LAN) and wide (WAN) networks, as well as organize remote access for small networks (up to 100 connections), including the use of protocols such as: IP, IGRP, Serial, Frame Relay, IP RIP, VLANs, RIP, Ethernet, Access Lists.
Requirements for certification
Basic knowledge of networking, approximately one year of experience as an administrator or equivalent training is desirable. One () or two (s) exams are required. The choice depends on the degree of preparation of the candidate and financial preferences. Below are the certification options:
- Accelerated.
- Classical.
- At the Cisco Networking Academy.
CCNA Routing and Switching Certification Renewal
The certification is valid for 3 years. To update your status, you must pass the current version of the CCNA exam or ICND2 or exam Cisco Specialist(excluding Sales Specialist exams) or CCIE written exam.
Preparation courses for certification
| Pass option | Duration of passage | Courses | Exam | ||
|---|---|---|---|---|---|
| Accelerated. Very fast. Only the essentials for taking CCNA in one course. |
5 days |
CCNAX 3.0: Using CISCO Networking Equipment: A Crash Course. Version 3.0 | 200-125 | ||
| Classical. The traditional way to take CCNA certification after completing two courses. |
10 days |
ICND1: Using Cisco Networking Equipment v 3.0 Part 1 Official textbook + translation into Russian! |
100-105 | ||
| ICND2: Using Cisco Networking Equipment v 3.0 Part 2 Official textbook + translation of the laboratory manual! |
200-105 | ||||
| Cisco Networking Academy Due to the emphasis on self-preparation, it is the longest, but also the most affordable option. |
77 days (11 weeks) |
IT Academy is an authorized training center Cisco - Cisco Learning Partner Associate. Every year our company is recognized as one of the best Cisco training centers in Europe, in the Quality Distinction Award nomination. Cisco Authorized Courses are offered in all branches of the IT Academy in Russia. In our Testing Centers, Cisco specialists are certified according to the qualifications of Associate, Professional and Expert (Expert, CCIE). Various tracks on three levels meet professional needs. In addition, there are a number of specialist certifications designed to test knowledge of specific technologies, solutions or job responsibilities... Cisco is a global leader in networking that is transforming the way people communicate, communicate and collaborate. The company's activities are focused on five main technological areas: backbone routing, switching and services; collaboration solutions; data center virtualization and cloud computing; video technology; architecture for business transformation. Cisco solutions are used in the main sectors of the Russian economy: mechanical engineering, metallurgical and oil and gas industries, construction and real estate, retail, banks, investment and insurance companies.
Since 2005, Cisco has maintained and developed partnerships with the Center "Specialist" at the Moscow State Technical University. N.E. Bauman in the field of education. Long-term cooperation confirms competence, reliability and high quality educational services Center. All classes are conducted by the best trainers of the Center according to the most modern and effective foreign methods recommended by Cisco Systems.
Oksana Barsukova
Learning Partner Relationship Manager in Russia and other CIS countries
Computer training center "Specialist" at the Moscow State Technical University named after N.E. Bauman is authorized training center Cisco. We offer you a unique training program for certified specialists for the status of CCENT, CCNA, CCNP, CCIE and CCDP.
The quality of the classes meets the uniform international standards and is guaranteed double control of the entire educational process: on the part of Cisco and on the part of the Center "Specialist" at MSTU N.E. Bauman (Cisco Learning Solutions Partner Associate). In 2013, the high quality of training in Cisco technologies at the Specialist Center was twice awarded the Cisco Quality Distinction Award and. Upon completion of the courses, you receive an international Cisco certificate - your pass to the world of high information technologies and successful career growth!
Best teachers
The close cooperation of the Center "Specialist" with Cisco Systems will allow you to better prepare for exams, thanks to the latest training courses on Cisco networking technologies. Classes are taught by experienced, highly trained, Cisco award-winning instructors who are certified by the industry's most prestigious CCIE (Cisco Certified Internetwork Expert) certification. Teaching is conducted according to the most advanced and effective foreign teaching methods recommended by Cisco Systems. The combined approach in the learning process allows you to convey to the audience not only theoretical knowledge, but also practical, thanks to illustrated examples.
Practice and seminars
Listeners can really practice on the most modern network equipment Cisco Systems, which forms the basis of training on Cisco network technologies at the Center "Specialist". Thus, from the very first minutes of training, students begin to immerse themselves in the principles of interaction between routers, routers and switches. Only the Center "Specialist" conducts field training on its own Cisco equipment.Online learning
If you do not have time, if you cannot physically attend the classes, then you have at your disposal a unique technology for teaching network technologies Cisco - online training. Thanks to her, you can, without leaving your home, be really present in the class, see everything that other students see, communicate with the teacher, ask questions and comment on the answers of others. Online training for Cisco networking technologies allows you to gain knowledge in full, without loss of quality. You save your time, money and study in a familiar environment!
Convenient schedule and discounts
The Center "Specialist" has a flexible training schedule. At your disposal Cisco courses in the morning, afternoon, evening and on weekends! The Center has a special system of promotions and discounts, in addition, the schedule reflects discounts for individual courses.
Employment
Only the Center "Specialist" provides support to its graduates after training. Cisco Certified Technology Professionals have a special place in the IT workforce market. This is not the first year that these are the most demanded and highest paid professionals. Cisco Systems is the world leader in networking and the largest manufacturer of sophisticated networking equipment. Cisco supplies more than 80% of the routers that make up the backbone of the Internet. The company's state-of-the-art solutions power the interconnected networks of thousands of organizations, government agencies and services around the world.
Cisco Networking Academy
Cisco Networking Academy is a special project of Cisco, supported by the Center "Specialist". A key feature of the academy is training from scratch for any person, regardless of his place of residence and degree of training, to the level of an international specialist. At the same time, due to a specially developed training program, the cost of training is much lower.
There is a debate among network professionals: is it possible (and worthwhile) to prepare for the CCNA exam on your own or? In this article, we would like to give some useful advice to those who have chosen the path self-preparation for the Cisco CCNA exam.
So, is it possible or not?
The short answer is yes, you can prepare, and not just somehow, but qualitatively. Successfully pass industry certification and pursue a career in networking with a minimum of money. All that is needed for this is a great desire to achieve success, high organization, the ability to plan your time and clearly follow these plans. In short, this is possible if your head is not just for wearing a hat!
The preparation process can be divided into two stages - theory and practice.
Theory
Theoretical materials on the Internet - a wagon and a small cart. The problem is not how to find them, but how to swallow and digest such a volume of information, and not choke.1. Cisco Education Network
A great reference point for self-study is the Cisco Education Network site. Access to site materials is limited, full access is only for registered users, but registration is free.Here you can find a list of topics you need to know to undergo industrial certification - Syllabus, will get acquainted with the details of the requirements for the examiner and such details of the exam itself as the time to complete it and the cost.
In the section "preparation for the exam" - Study / Learn you can watch videos and other materials on specific topics, most of which are available for free. In the section "workshop" - Practice, there are test options for certain topics, and in the "Take your exam" section, you can practice performing the certification exam itself in "close to combat" conditions, though not for free anymore.
Thus, the Cisco Education Network is the largest and most authoritative resource containing always verified, fresh information for self-study. The only drawback is that all materials are in English. Although is this a disadvantage? For a modern specialist in the field of computer networks, English must become a native language!
An overview of training programs and training methods in Russian can be found at.
2. Best books
It is also recommended to purchase the self-paced guides from Cisco Press here. These books are called that - the official guide to preparing for the CCNA exam, for many years these books have come out of the pen Wendell Odom, CCIE 1624, latest edition 2011 - CCNA 640-802 Official Cert Library, Updated, 3rd Edition.There are also alternative sources of information. For example books Todd Lemmla, their publication correlates with the release of official manuals, and often even ahead of them. Lemml's latest CCNA preparation guide was also published in 2011 - CCNA Cisco Certified Network Associate Study Guide, 7th Edition. Comparing book prices, official guides are more expensive, typically $ 50-100. When it comes to quality, the ratio is not always in favor of the official guidelines. The language that Todd Lemml writes with is more lively than Odom and the information in his interpretation is more readily perceived, although this is just my subjective opinion.
3. CBT Nuggets
Another way to learn - video tutorials from CBT Nuggets, - cbtnuggets.com. True, several dozen Jeremy Cioara video tutorials, as well as the books and courses of Todd Lemml, are not distributed by the authors for free and all this is also in English, but they can be found on the network not only from official distributors.4. Russian-language materials
If with English language there are problems, but I really want to learn, that is, intermediate options:On all the listed resources, you can find interesting, detailed and understandable explanations of individual questions and topics covered in the certification exam, and not only in English, but also in Russian. But don't rely on a ready-made and complete course of study! The systematization of the material and the verification of the assimilation of knowledge will have to be done independently, and this is a lot of work. We can say - this is a payment for free!
Practice
The second part of the preparation task is practice.To obtain practical skills, you need equipment: Cisco switches and routers. How long is this access needed? The question is complex and the answer to it in each specific case is individual, according to experience, it is undesirable to have less than 20 hours of total access time for the entire preparation time. Options for obtaining or accessing the equipment itself.
1. Own "hardware"
Purchase of used equipment. The entire laboratory (3 routers, 3 switches) will cost $ 300 - $ 400. The advantage of buying equipment is obvious - unlimited access and any time of work on it. And if you are lucky, you can find the necessary equipment at your work absolutely free of charge.2. Equipment rental
Rent a rack with equipment and connect to it remotely for laboratory work. There are many offers of this kind on the Internet. The cost and the method of paying rent can vary greatly. From hourly pay $ 4-8 per hour to buying rent for weeks and months, for example, 3 months for 200 euros.There are also free offers, the most famous www.myrouterlab.com and packetlife.net/lab, the latter is temporarily unavailable due to relocation. As always, the free service has a number of restrictions - the inability to connect by the client SDM or Ccp, outdated equipment. You will have to reserve time for a week or a month and wait in line, and having access to follow certain rules, for example, if you have reserved 2 hours of work for PacketLife, have worked for 10 minutes and you are tired, then it is possible that the next time you will not be able to use the service - you will get a "ban" for "bad behavior". If, having reserved 4 hours, you are half an hour late with the connection, you may find that you will not connect at all, your time is freed and someone else has taken it. On paid services for your money, you will get everything in the best possible way, no one will take your paid time and no one will teach you the correct behavior.
3. Dynamips
Using a virtual machine Dynamips... V recent times working with this virtual machine and the graphical frontend is most often described GNS3 rather than the console Dynagen. Although the Dynagen window is preserved and present in GNS3, it is practically not used during operation. There were several publications on Habré on the topic of basic configuration of a virtual router and or creating a laboratory for the Voice track. This topic with a big "beard" and a few articles are too few to reveal all the subtleties of working with this wonderful product. He helped, and will continue to help many generations of "Tsiskars" to master the wisdom of network technologies when they do not have sufficient funds to purchase or rent a laboratory bundle. Disadvantages Dynamips - support only for legacy platforms, with the exception of maybe 7200 and the impossibility of full virtualization of the Cisco switch. In preparation for CCNA certification, these shortcomings are almost invisible; the basic elements of the technology are studied, which have not changed in modern implementations, and operation on a 3640 router with a 16-port switching module is "almost" similar to the operation of a switch.4. Emulators
The last available option for getting practical skills is working with software emulators. Probably the best of them is the product of Cisco itself, the program Cisco Packet Tracer, the latest version of the product 5.3.3 allows you to build large and complex network topologies and even supports multi-user work, i.e. parts of the topology can be distributed to different computers, however remote.Another famous product NetSim from Boson, current version 8.0. It is not so versatile and focused on a specific task - mastering the skills of configuring devices on the command line, therefore it always comes with a set of pre-installed labs. Both programs are protected by licenses. NetSim cost depends on the set of labs included in the program, for the minimum CCENT certification level (ICND1) the price is $ 99. Packet Tracer is only distributed at Cisco Networking Academies, where students receive it free of charge. This program is not officially for sale. One of the most exciting hands-on learning opportunities is performing virtual labs included in free training courses marketed by Cisco as Additional materials for training IT professionals. They are grouped by area and product and will also require free pre-registration on cisco.com itself.
Conclusion
Which preparation option should you choose? You decide. There is one more method of preparation for certification, which I have not mentioned - the use of so-called "dumps" - ready-made answers to exam questions. I will quote here Andrei Biryukov ("System Administrator" magazine, No. 11, 2008): "When traveling through various Internet resources dedicated to certification, sooner or later you will find mention of braindump, testking, pass4sure and others" teaching materials". ... Brandumps are actually exam questions stolen by irresponsible employees of testing centers. These questions are presented with answers, and this is where the fun begins, since these answers ... contain errors. In addition, even if the answer is correct, there is no explanation for it, which also does not contribute to the understanding of the material. …… Memorizing answers from a dump is useless ... But dumps will be useful if you do not look back, but try to answer each of the questions yourself, and in case of ambiguity, clarify on the appropriate thematic forum, and do not take on faith the answer from the dump. ... the material needs to be understood, not memorized. "There is nothing to add to what has been said. I wish you all success in your certification and professional career.
Cisco Networking Training
Fundamental knowledge of networksA large amount of practice on real hardware
State-of-the-art teaching materials
Preparation for certification exams
Discount on certification testing
Course catalog
About courses
Courses of the program " Cisco Networking Academy"are an excellent basis for acquiring basic knowledge and improving both students and for IT specialists... A distinctive feature of these courses is that in addition to fundamental theoretical knowledge about Networks, students acquire practical experience with telecommunications equipment and technologies.
Educational materials, electronic systems knowledge assessment, practical laboratory exercises are available to students both in the classroom and at home via the Internet.
Course Completion Certificate
After successfully completing any course Cisco Networking Academy the student can request a certificate of completion with a list of knowledge gained through the program. The certificate will show the name of the Listener and Cisco Academy in which he was trained. Such a certificate is a reminder of the student's success and also serves as an excellent addition to a resume.
Discount on taking international certification exams
High scores and successful completion of some courses allow you to get a discount when paying for exams ICND 1, ICND 2 and CCNA at Pearson Vue testing centers
Answers to frequently asked questions
What is taught at Cisco Networking Academy? V Cisco Networking Academy teach the theoretical foundations and practical skills of setting up telecommunications equipment manufactured by Cisco Systems, as well as network administration. Starting with the study of the basics of signal transmission, types of data transmission media, cable testing tools, types of network equipment, the course moves on to practical issues related to the configuration and administration of network equipment in local and global networks with various protocols. What is the difference between Cisco Short Term Authorized Courses and the Cisco Networking Academy Program? Knowledge in authorized courses is delivered concisely and in the shortest possible time (CCNA: 5-10 days), which is more beneficial for busy business people. The 144-hour Cisco Networking Academy CCNA program is primarily aimed at students and lasts from 3 to 9 months. For training in accelerated authorized courses, the requirements for the initial level of students are increased, while the Academy trains students even without knowledge in the field of network and computer technologies. Who is the CCNA course for? The CCNA curriculum is basic and requires no prior knowledge of networking. It is intended primarily for senior students of universities who want to work in companies involved in the implementation, operation and system integration of modern data transmission networks and telecommunication technologies. It is essential that in addition to theoretical knowledge, students acquire confident practical skills in setting up various network equipment. About a third of the study time is devoted to laboratory work and practical exercises, and at the end of the CCNA course, a course project is completed. How long is the CCNA learning process? CCNA training is divided into thematic blocks (semesters). Full-time education in the volume of 4 semesters CCNA lasts about 9 months (training begins at the end of September and ends in May-June of the following year). Distance learning in the amount of 4 semesters, CCNA also lasts about 9 months (you yourself choose the date of the start of the study). The short-term study of four CCNA semesters lasts about 3 months (takes place several times a year). What are the requirements for course participants? The CCNA course is basic and does not require prior knowledge of modern technology to study it. How are students' knowledge and skills monitored? To control the level of knowledge and skills of students of the Academy, Cisco Systems has developed and actively uses a multi-level testing system during and after training, which operates in an automatic mode. The rating scale is from 0 to 100 points. Depending on the chosen training program, questions and answers can be either in English or in Russian. Based on the results of intermediate and semester tests, the teachers of the Academy conduct an analysis of errors with the students. When Should Students Take the Cisco Certified Network Associate Exam? Cisco recommends taking the CCNA exam after completing the fourth semester of the program.
